I-160-amawele ehashe amane etreyini yesondo-drive
Izibonelelo
● I-160 ihashe ihashe i-4-wheel drive, ibhalwe nge-injini yokuxinana ePhezulu ye-6-cylinder.
● Ngenkqubo yokulawulwa kolawulo, amandla anamandla, ukusetyenziswa kwamafutha asezantsi, kunye nokusebenza kakuhle kwezoqoqosho.
● Uxinzelelo olunamandla lufikelela kwi-cylinder ye-oyile engaqhelekanga. Inkqubo yohlengahlengiso olunzulu lwendlela yamkela uhlengahlengiso lweendawo kunye nolawulo olujikelezayo ngokuziqhelanisa nokuziqhelanisa nokuzibhokoxa.
● I-16 + 8 Shift Shift Shift, ukuthelekisa igiya efanelekileyo, nokusebenza ngokufanelekileyo.
● I-clutch ezizimeleyo ezibambeleyo, ezilungele ukutshintsha kunye nokudibanisa kwamandla.
● Iziphumo zamandla zinokuxhotyiswa ngezintya ezahlukeneyo ezifana ne-750r / imiz okanye i-760r / i-70r / ezinokuhlangabezana neemfuno zesantya zoomatshini abahlukeneyo kwezolimo.
● Eyona nto ilungele ukulima, ukujikeleza kunye neminye imisebenzi yezolimo kwiindawo ezinkulu zamanzi kunye nemimandla eyomileyo, enokusebenza ngokufanelekileyo nangokuthuthuzelayo.
Ipharamitha esisiseko
| Iimodeli | CW1604 | ||
| Iiparamitha | |||
| Uhlobo | I-mel drive yevili | ||
| Ubungakanani bembonakalo (ubude * ubude * ukuphakama) mm | 4850 * 2280 * 2910 | ||
| Isondo le-BSDE (MM) | I-2520 | ||
| Ubungakanani beTire | Ivili langaphambili | 14.9-26 | |
| Isondo elingasemva | 18.4-338 | ||
| I-Wheel yonyathela (mm) | I-Wheel yangaphambili inyathela | I-1860,1950,1988,2088 | |
| Ngasemva kwesondo | I-1720,1930,2115 | ||
| Imizuzu ye-Min.iyo (mm) | I-500 | ||
| Injini | Amandla aMandla (kW) | I-117.7 | |
| Hayi. Ye-cylinder | 6 | ||
| Amandla e-EUTT (kW) | I-760/850 | ||
FAQ
1. Zithini iimpawu zentsebenzo zeetrektara ezinamavili?
Iitrektara ezinamavili zihlala zinika i-roneperiction elungileyo kunye nokuphatha, kwiinkqubo ezine ngamavili abonelela ngokuhamba kunye nokuzinza, ngakumbi kwiimeko ezityibilikayo okanye kwiimeko zomhlaba ezingagungqiyo.
2. Ndenza njani ulondolozo kunye nokusebenza kwetrektara yam enamavili?
Jonga rhoqo kwaye utshintshe ioyile, isihluzo somoya, isihluzi se-pilli, njl njl.
Jonga uxinzelelo lomoya kunye nokunxiba kwamatayara ukuqinisekisa ukuqhuba okukhuselekileyo.
3. Ungafumanisa njani ukusombulula iingxaki zetrektara enamavili?
Ukuba kukho isikhuselo okanye ubunzima bokuqhuba, kunokuba yimfuneko ukukhangela inkqubo yokuqhuba kunye nenkqubo yokumiswa kweengxaki.
Kwimeko apho kuncitshiswe ukusebenza kwe-injini, inkqubo yokubonelela amafutha, inkqubo yokufumana i-Ignation okanye inkqubo yokufumana umoya inokufuna ukufundwa.
4. Zeziphi iingcebiso kunye nezilumkiso xa isebenza itrektara enamavili?
Khetha igiya efanelekileyo kunye nesantya somhlaba ohlukeneyo kunye neemeko zokusebenza ukuze uphucule ukusebenza kakuhle.
Funda itrektara efanelekileyo, isebenza kunye nokumisa iinkqubo ukuthintela ukonakala okungafunekiyo koomatshini.
